DESIGN
LED lamps of the LL 2x10(9) W and LL 2x18 W types are made up of a mounting frame with an additional protective canopy. These components manufactured of acid-resistant steel and coated with powder paint serve as a support for a lamp bowl meant to provide sufficient protection against mechanical impacts and to house LED sources of light. The lamp fitting guarantees tightness with the IP65 index of protection. The lamp bowl is being closed and fixed to the mounting frame by means of latching locks. The luminary is provided with a terminal box to enable connection and /or throughout routing of supplying cables.
Type |
LL 2x10(9) W | LL 2x18 W |
Rated power supply voltage | 230 V AC 50Hz | 230 V AC 50Hz |
Maximum consumption of current | 100 mA | 160 mA |
Type of electric network | IT | IT |
Source of light | LEDs | LEDs |
Rated luminous flux | 900 lm | 1700 lm |
Illumination angle of LEDs | 270 ° | 270 ° |
Colour temperature | 3600-4800 K | 3600-4800 K |
Diameter of light tubes | T8 | T8 |
Fixation holder of light tubes | G13 | G13 |
Mounting of the lamp enclosure | Dibbles and hooks (included) | Dibbles and hooks (included) |
Enclosure index of protection | IP 65 | IP 65 |
Type of inlet glands | PG 13.5 | PG 13.5 |
Maximum permissible cross-section of connecting cables |
2,5 mm 2 | 2,5 mm 2 |
Overall dimensions | 900 x 170 x 120 mm | 1500 x 170 x 120 mm |
Weight | 3 kg | 5 kg |
Ambient temperature | -10 °C to +40 °C | -10 °C to +40 °C |
Relative humidity @+40ºC | up to 95 % | up to 95 % |
Fluctuations of power supply voltage in the network |
0,85 to 1,2 Un | 0,85 to 1,2 Un |